Welcome to Your AVA GO+
Everything you need to get started, simple, fast, and built to perform.
QUICK START GUIDE (MOST IMPORTANT)
Step 1 — Connect Water
Connect the garden hose to the unit.
Step 2 — Purge Air
Turn on the water and hold the trigger for 30–60 seconds to remove air from the system. Without lance or nozzle attached.
Step 3 — Prepare Hose
Fully extend the high-pressure hose to prevent kinks and ensure smooth operation.
Step 4 — Power On
Turn on the unit — you’re ready to start cleaning.
WHAT’S INCLUDED
Premium Foam Cannon (1L)
Creates thick foam to lift dirt from the surface. Adjustable spray pattern for full control.
Zoom Lance
Extends from 22.5" to 35" for better reach and more comfortable cleaning angles.
Microfiber Mop With Water Flow
Perfect for fast, gentle cleaning of cars and windows.
Zero-Force Gun
Designed with a quick connect and reduced trigger resistance for less hand fatigue.
40 ft Flexi Hose
Kink-resistant design that lays flat and connects easily with quick connects.
Nozzle Set
Includes 15°, 25°, 40°, and 60° spray tips for different cleaning tasks.
Turbo Nozzle
High-power rotating nozzle for tough surfaces like concrete.
⚠ Not recommended for vehicles or delicate surfaces.
35 ft Power Cable (GFCI)
Built-in safety with extended reach for maximum flexibility.
BEST PRACTICES
Before You Start Cleaning
- Always turn water on before starting the unit
- Fully purge air from the system before powering on
- Extend the hose completely before use
- Use the foam cannon for detergent application (not through the unit)
STORAGE & WINTERIZATION
After Use & Storage
Step 1
Turn off the unit and water supply.
Step 2
Pull the trigger to release built-up pressure.
Step 3
Disconnect hoses and accessories.
Step 4
Turn the unit on and run it for 30–60 seconds until no water comes out. Then turn it off.
Step 5
Reel in the hose and store accessories on the unit.
Important:
Always store your unit in a dry, non-freezing environment.
Frost damage is not covered under warranty.